Middle East's Needle Roller Bearings Market Set to Grow at a CAGR of +2.4% through 2035, Reaching 5.1K Tons - News and Statistics - IndexBox

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

IndexBox has just published a new report: Middle East - Needle Roller Bearings - Market Analysis, Forecast, Size, Trends And Insights.

The Middle East needle roller bearings market is poised for sustained growth in the coming years, with a projected increase in market volume and value. The anticipated CAGR rates indicate a positive outlook for the industry, highlighting the region's growing demand for these essential components across various sectors.

Driven by increasing demand for needle roller bearings in the Middle East, the market is expected to continue an upward consumption trend over the next decade. Market performance is forecast to retain its current trend pattern, expanding with an anticipated CAGR of +2.4% for the period from 2024 to 2035, which is projected to bring the market volume to 5.1K tons by the end of 2035.

In value terms, the market is forecast to increase with an anticipated CAGR of +3.8% for the period from 2024 to 2035, which is projected to bring the market value to $164M (in nominal wholesale prices) by the end of 2035.

In 2024, consumption of needle roller bearings decreased by -2.6% to 3.9K tons for the first time since 2021, thus ending a two-year rising trend. The total consumption volume increased at an average annual rate of +2.4% over the period from 2013 to 2024; the trend pattern remained consistent, with only minor fluctuations throughout the analyzed period. The volume of consumption peaked at 4K tons in 2023, and then fell slightly in the following year.

The revenue of the needle roller bearing market in the Middle East was estimated at $109M in 2024, approximately equating the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). The market value increased at an average annual rate of +3.3% from 2013 to 2024; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The level of consumption peaked in 2024 and is expected to retain growth in the immediate term.

The country with the largest volume of needle roller bearing consumption was Turkey (2.9K tons), accounting for 75% of total volume. Moreover, needle roller bearing consumption in Turkey exceeded the figures recorded by the second-largest consumer, Iran (375 tons), eightfold. The third position in this ranking was held by the United Arab Emirates (287 tons), with a 7.3% share.

In Turkey, needle roller bearing consumption expanded at an average annual rate of +1.0% over the period from 2013-2024. The remaining consuming countries recorded the following average annual rates of consumption growth: Iran (+18.6% per year) and the United Arab Emirates (+13.1% per year).

In value terms, Turkey ($90M) led the market, alone. The second position in the ranking was taken by the United Arab Emirates ($6.9M). It was followed by Iran.

In Turkey, the needle roller bearing market expanded at an average annual rate of +2.9% over the period from 2013-2024. In the other countries, the average annual rates were as follows: the United Arab Emirates (+7.4% per year) and Iran (+10.7% per year).

The countries with the highest levels of needle roller bearing per capita consumption in 2024 were Turkey (34 kg per 1000 persons), the United Arab Emirates (28 kg per 1000 persons) and Kuwait (27 kg per 1000 persons).

From 2013 to 2024, the most notable rate of growth in terms of consumption, amongst the main consuming countries, was attained by Iran (with a CAGR of +17.1%), while consumption for the other leaders experienced more modest paces of growth.

In 2024, approx. 1.8K tons of needle roller bearings were produced in the Middle East; growing by 4.7% compared with the previous year. Over the period under review, production, however, continues to indicate a slight shrinkage. The growth pace was the most rapid in 2019 with an increase of 12%. As a result, production reached the peak volume of 2.3K tons. From 2020 to 2024, production growth remained at a lower figure.

In value terms, needle roller bearing production expanded sharply to $54M in 2024 estimated in export price. In general, production showed a relatively flat trend pattern. The pace of growth was the most pronounced in 2017 when the production volume increased by 23%. Over the period under review, production attained the maximum level at $65M in 2019; however, from 2020 to 2024, production failed to regain momentum.

The country with the largest volume of needle roller bearing production was Turkey (1.6K tons), comprising approx. 91% of total volume. Moreover, needle roller bearing production in Turkey exceeded the figures recorded by the second-largest producer, Kuwait (99 tons), more than tenfold.

From 2013 to 2024, the average annual rate of growth in terms of volume in Turkey amounted to -2.3%. The remaining producing countries recorded the following average annual rates of production growth: Kuwait (+1.7% per year) and Bahrain (+3.6% per year).

In 2024, purchases abroad of needle roller bearings decreased by -6.4% to 2.3K tons for the first time since 2017, thus ending a six-year rising trend. In general, imports, however, recorded a strong expansion. The pace of growth was the most pronounced in 2016 with an increase of 41% against the previous year. Over the period under review, imports hit record highs at 2.5K tons in 2023, and then dropped in the following year.

In value terms, needle roller bearing imports shrank to $47M in 2024. Total imports indicated a buoyant increase from 2013 to 2024: its value increased at an average annual rate of +5.0% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, imports increased by +87.8% against 2015 indices. The most prominent rate of growth was recorded in 2023 with an increase of 31% against the previous year. As a result, imports reached the peak of $50M, and then dropped in the following year.

Turkey was the key importer of needle roller bearings in the Middle East, with the volume of imports recording 1.4K tons, which was approx. 62% of total imports in 2024. Iran (375 tons) held a 16% share (based on physical terms) of total imports, which put it in second place, followed by the United Arab Emirates (14%). Saudi Arabia (72 tons) followed a long way behind the leaders.

Imports into Turkey increased at an average annual rate of +8.5% from 2013 to 2024. At the same time, Iran (+18.6%), the United Arab Emirates (+10.9%) and Saudi Arabia (+5.3%) displayed positive paces of growth. Moreover, Iran emerged as the fastest-growing importer imported in the Middle East, with a CAGR of +18.6% from 2013-2024. Iran (+9.7 p.p.) and the United Arab Emirates (+2.4 p.p.) significantly strengthened its position in terms of the total imports, while Turkey saw its share reduced by -3.3% from 2013 to 2024, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, Turkey ($31M) constitutes the largest market for imported needle roller bearings in the Middle East, comprising 66% of total imports. The second position in the ranking was taken by the United Arab Emirates ($7M), with a 15% share of total imports. It was followed by Iran, with a 9% share.

From 2013 to 2024, the average annual rate of growth in terms of value in Turkey totaled +5.6%. The remaining importing countries recorded the following average annual rates of imports growth: the United Arab Emirates (+3.4% per year) and Iran (+8.4% per year).

The import price in the Middle East stood at $20,073 per ton in 2024, approximately mirroring the previous year. Over the period under review, the import price, however, saw a perceptible setback. The most prominent rate of growth was recorded in 2021 when the import price increased by 0.6% against the previous year. The level of import peaked at $30,554 per ton in 2013; however, from 2014 to 2024, import prices failed to regain momentum.

Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Saudi Arabia ($27,336 per ton), while Iran ($11,169 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by Saudi Arabia (-0.4%), while the other leaders experienced a decline in the import price figures.

In 2024, needle roller bearing exports in the Middle East skyrocketed to 149 tons, with an increase of 20% compared with 2023. In general, exports showed a buoyant expansion. The most prominent rate of growth was recorded in 2017 with an increase of 60%. The volume of export peaked at 156 tons in 2022; however, from 2023 to 2024, the exports stood at a somewhat lower figure.

In value terms, needle roller bearing exports surged to $4.9M in 2024. Overall, exports showed prominent growth. The pace of growth was the most pronounced in 2017 when exports increased by 116% against the previous year. Over the period under review, the exports reached the maximum in 2024 and are likely to continue growth in the immediate term.

Turkey was the key exporter of needle roller bearings in the Middle East, with the volume of exports accounting for 101 tons, which was approx. 68% of total exports in 2024. It was distantly followed by the United Arab Emirates (41 tons), generating a 28% share of total exports. Kuwait (2.8 tons) held a minor share of total exports.

Turkey was also the fastest-growing in terms of the needle roller bearings exports, with a CAGR of +15.6% from 2013 to 2024. At the same time, Kuwait (+3.8%) and the United Arab Emirates (+2.7%) displayed positive paces of growth. From 2013 to 2024, the share of Turkey and Kuwait increased by +31 and +1.9 percentage points, respectively.

In value terms, Turkey ($3.9M) remains the largest needle roller bearing supplier in the Middle East, comprising 79% of total exports. The second position in the ranking was held by the United Arab Emirates ($816K), with a 17% share of total exports.

In Turkey, needle roller bearing exports expanded at an average annual rate of +21.4% over the period from 2013-2024. In the other countries, the average annual rates were as follows: the United Arab Emirates (+3.3% per year) and Kuwait (+7.8% per year).

The export price in the Middle East stood at $33,078 per ton in 2024, increasing by 2.5% against the previous year. Export price indicated a tangible increase from 2013 to 2024: its price increased at an average annual rate of +4.9% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, needle roller bearing export price increased by +92.2% against 2020 indices. The most prominent rate of growth was recorded in 2023 an increase of 41% against the previous year. The level of export peaked in 2024 and is likely to see gradual growth in years to come.

Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Turkey ($38,344 per ton), while the United Arab Emirates ($19,779 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by Turkey (+5.0%), while the other leaders experienced more modest paces of growth.

Source: IndexBox Market Intelligence Platform

This report provides an in-depth analysis of the needle roller bearing market in the Middle East. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

Making Data-Driven Decisions to Grow Your Business

A Quick Overview of Market Performance

Understanding the Current State of The Market and its Prospects

Finding New Products to Diversify Your Business

Choosing the Best Countries to Establish Your Sustainable Supply Chain

Choosing the Best Countries to Boost Your Export

The Latest Trends and Insights into The Industry

The Largest Import Supplying Countries

The Largest Destinations for Exports

The Largest Producers on The Market and Their Profiles

The Largest Markets And Their Profiles